When you plan to take Ruckus SmartZone SE and Partner Assessment Exam, you may use this study guide to pass your Ruckus Technical Certification. (New: Access Commscope University for the training and Exam) To pass this accreditation exam, you need to have at least 75% passing score to test your mastery of SmartZone technology and concepts.
Note that this Ruckus SmartZone SE and Partner Assessment Exam guide is purely for your study reference only and please do not fully rely on the below question and answer.
SmartZone SE and Partner Assessment Exam Guide
What is the purpose of band balancing when configured in a Ruckus SmartZone network controller?
a. load balance clients between APs on the same zone
b. load balance clients between 2.4GHz and 5GHz bands in the same AP
c. load balance clients between controllers in the same cluster
d. load balance clients between dataplanes in the same controller
Which two actions are allowed in a partner domain in a SmartZone High Scale network controller running SmartZoneOS 5? (Choose two.)
Select one or more:
a. AP firmware upgrade upload
b. Cluster Backup & Restore
c. creation of sub-domains
d. system firmware upgrades upload
e. shared proxy AAA service for multiple zones within the partner domain
Which system default administrative role provides access for an admin user to perform all functions in the Web UI of a SmartZone network controller running SmartZoneOS 5?
a. Super Admin
b. SmartZone Admin
c. Network Admin
d. API Admin
What is the default Max Clients per Radio when configuring a WLAN in a Ruckus SmartZone network controller running SmartZoneOS 5?
Which client identifier is used to create a layer 2 ACL to allow or deny client access to a wireless network?
a. client MAC address
b. client hostname
c. client VLAN
d. client IP address
What can be controlled or managed via a User Traffic Profile in SmartZoneOS 5? (Choose two.)
Select one or more:
a. minimum data rate per user
b. IP ACLs per user
c. VLAN pool assignment per user
d. rate limiting per user
e. client isolation settings per user
Which port is used when browsing to the SmartZone network controller Web UI?
What is one difference between a domain and a zone?
a. A domain is used for zone management and a zone is used for AP configuration.
b. A domain is used to manage user access and privileges to zones and a zone is used to manage admin privileges to an area.
c. A domain is used for admin management access to the system and a zone is used as template to create new domains.
d. A domain is used for AP configuration and a zone is used for domain management.
An environment is configured to use DNS for APs to automatically discover and join their new SmartZone controller. Which steps must be completed for the APs to discover their controller? (Choose two.)
Select one or more:
a. The controller hostname must be supplied to the AP from the DHCP server
b. A DNS record for RuckusController with the IP address of your SmarZone controller must be configured in the DNS server
c. The DHCP server must provide the correct DNS domain name to the AP
d. The DHCP server must have a static host entry for each AP
e. A dedicated smartzone.ruckuswireless domain must be configured in the DNS server
Which port is used to log into the CLI or use SSH to a SmartZoneOS 5 controller when a management interface Access Control List is enabled?
Which location in the Web UI of a vSZ-H running SmartZoneOS 5 enables viewing and editing of the network interfaces?
a. System > Cluster
b. Administration > Cluster
c. Management > System
d. System > Network
What is a Registration Rule used for?
a. to load balance the APs in a controller based on AP assigned index number
b. to automatically assign APs to a Zone based on AP IP, Provision Tag or GPS coordinates
c. to assign APs to a controller automatically based on AP IP, Provision Tag or GPS coordinates
d. to automatically assign APs to a vSZ-D based on AP IP, Provision Tag or GPS coordinates
What is the function of an Application Policy?
a. Block a user device with a specific application installed from joining the WLAN
b. Block a management application such as Swipe from accessing the controller
c. Block traffic from a defined application from passing over the WLAN
d. Uninstall an application from a user device as they join a WLAN
A customer has a chain of coffee shops and wants to ensure that customers are only able to attach to their Wi-Fi during business hours. What is the best way to provide this service?
a. Create a service schedule and apply it to the guest WLAN
b. Deploy a SZ-100 controller on site at each coffee shop and turn it off at the end of the day
c. Create a zone schedule apply it to the target zone for the coffee shops
d. Create a service schedule and apply it to the access point radios
In a four-node cluster how is data consistency maintained?
a. Data is not replicated and is kept on the master node only
b. Data is kept on a seperate dedicated vSZ-D node
c. The master node replicates all data to all other members
d. Data is broken into four categories and each category is replicated to 2 nodes
When using ChannelFly, what 802.11 standard is used by the AP to communicate a channel change to the clients?
After a client is authenticated using a Web Authentication Portal, which two options exist for the user start page? (Choose two.)
Select one or more:
a. redirect the client to the URL initially navigated to before being redirected
b. redirect the client to a blank page
c. redirect the client to a configured URL of administrator choice
d. redirect the client to a secondary AAA server for 2-step authentication
e. redirect the client to the controller administration page
Where can the WLAN service on an AP radio be disabled in a SmartZone network controller running SmartZoneOS 5?
a. under the AP Group, under the Radio Options
b. at each individual AP, under the Radio Options
c. at the Zone level, under the Radio Options
d. under the System menu, in AP Settings
What is the primary difference between the SZ-104 and the SZ-124?
a. SZ-104 supports up to 500 APs, SZ-124 supports up to 1,000 APs
b. SZ-104 does not support multiple zones in SmartZoneOS 5
c. SZ-124 supports 10GbE, SZ104 supports 4x1GbE
d. SZ-104 supports a single power supply, SZ124 supports dual power supplies
Review the controller cluster configuration data.
You have a cluster of Ruckus controllers each with a control plane IP configured as follows:
Controller A: 10.1.1.1
Controller B: 10.1.1.2
Controller C: 10.1.1.3
Controller D: 10.1.1.4
An AP has been registered to the controller cluster and receives a list of controller control plane IPs from the Leader node that shows as follows:
10.1.1.3, 10.1.1.1, 10.1.1.4, 10.1.1.2
Based on this information, which IP will the AP send a join request to and form an SSH tunnel with in order to connect to the cluster?
a. AP will join controller C
b. AP will join controller B
c. AP will join controller A
d. AP will join controller D
Take a break on your study from 1-20 question above. Perhaps revise your training material and continue the 21-40 for SmartZone SE and Partner Assessment Exam Guide.
What is the primary function of the Control interface of a SmartZone controller?
a. used for AP to SmartZone communication
b. used for admin access to the SmartZone
c. used for clustering between SmartZone controllers
d. used for client data tunneling
What is the maximum number of simultaneously connected clients supported in a four node SmartZone Essentials cluster?
What additional OS Policy Services can be performed by enabling client fingerprinting? (Choose three.)
Select one or more:
a. Specify different hotspot login portals based on device type
b. Allocate specific device types to a dedicated VLAN
c. Apply rate limiting to specific device types only
d. Set different logging levels in SmartZone based on device type
e. Block access for specific device types
f. Apply URL filtering of specific web sites
What is the primary function of the Management interface of a SmartZone network controller?
a. used for clustering between SmartZone controllers
b. used for client data tunneling
c. used for admin access to the SmartZone
d. used for management traffic between AP and SmartZone
What is the function of a Hotspot WISPr walled garden?
a. to allow a client limited access to a pre-defined list of URLs without it being authorized
b. to allow limited access for a client to manage the controller
c. to allow unlimited access for a client to use social medial applications
d. to allow limited access for clients to communicate with other clients in the network
In a SmartZone High Scale network controller running SmartZoneOS 5, where do you configure Registration Rules?
a. System > Templates
b. Access Points > AP Settings
c. System > AP Settings
d. Access Points > Zones
Which CLI command displays the status of the LWAPP2SCG Policy?
a.get lwapp2scg status
b.show lwapp2scg config
c.get config lwapp2scg
d.show running-config lwapp2scg
Where is the Ruckus GRE tunnel profile configuration set for APs to tunnel traffic back to the vSZ-D in a Ruckus virtual SmartZone network controller running code SmartZoneOS 5?
a. in the WLAN group
b. at the Domain level
c. in the AP Group configuration
d. at the Zone level
Which item is delivered by the SMTP server?
a. DPSK passphrases
b. Syslog Events
c. AP Statistics
d. Guest Passes
When is the firmware of a newly joining AP upgraded in a SmartZone High Scale controller running SmartZoneOS 5?
a. Firmware is upgraded automatically immediately after the AP is added to the staging zone
b. AP and SmartZone controller firmware must match before the AP can discover the controller
c. Firmware is upgraded automatically immediately after discovery, before the AP is added to the staging zone
d. Firmware is upgraded automatically immediately after the AP has been moved to the target zone
User Partner1 has been assigned to a newly created partner domain named RuckusPartner. Partner1 has been given Super Admin privileges within the RuckusPartner domain. Partner1 needs to login to a Ruckus vSZ-H controller running SmartZoneOS 5 to test his credentials. When entering his username in the WebUI, which format should be used?
What is used to separate WLANs and assign different SSIDs to different APs or AP groups within a single zone?
a. zone groups
b. staging zone
c. WLAN groups
d. WLAN rules
What is the first step an AP takes when joining a Ruckus SmartZone network controller?
a. registers using an SSH tunnel to the control plane
b. registers to the controller using HTTPS
c. downloads the configuration from the controller
d. downloads the firmware from the controller
In a SmartZone network controller running SmartZoneOS 5, where can an administrator identify if a client has been authenticated?
a. under Clients > select a client from the right panel
b. under Wireless LAN > select a WLAN from the right panel
c. under Access Points > select an AP from the right panel
d. under Monitor > Client menu > select a client from the right panel
When configuring a WLAN in a SmartZone network controller running SmartZoneOS 5, what is the purpose of 802.11d found in the advanced section of the WLAN configuration?
a. to allow international clients to more easily join the wireless network
b. to make it easier to collect data on international clients
c. to allow roaming between networks for international clients
d. to allow for ease of roaming in the network
To support a Bonjour Gateway Policy, what type of port on an Ethernet switch must an access point be connected to?
a. access port
b. general port
c. routed port
d. trunk port
Which three virtualization hypervisors are officially supported for an on-premises Virtual SmartZone deployment? (Choose three.)
Select one or more:
a. VMware ESX
b. VMware Fusion
c. Microsoft Hyper-V
d. Kernel-based Virtual Machine (KVM)
e. VMware Workstation
What are two ways to deliver a guest pass to a client using a Ruckus SmartZone network controller? (Choose two.)
Select one or more:
a. by a webpage
b. by e-mail
c. by SMS
d. by a captive portal page
e. by fax
Which authentication standard is used in secured enterprise wireless network deployments?
Which protocol is used by a connected AP for on-going communications with a SmartZone controller?
d. Lightweight Access Point Protocol (LWAPP)
I have pass my exam using above SmartZone SE and Partner Assessment Exam Guide during last month (January 2020) and obtain the certification. If you are also looking for Ruckus ICX Implementer Exam Guide, or Ruckus Wired Portfolio Sales Engineer Pre-Sales Exam Guide. << Checkout this study guide too, it will definately help you on your Ruckus technical certification.